Substrate preparation Archive - Maleki GmbH https://www.malekigmbh.com/category/untergrundvorbereitung/ Innovative Lösungen für nachhaltiges Bauen Mon, 02 Mar 2026 08:24:13 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.1 https://www.malekigmbh.com/wp-content/uploads/2023/10/cropped-Logo_Maleki_favicon-32x32.png Substrate preparation Archive - Maleki GmbH https://www.malekigmbh.com/category/untergrundvorbereitung/ 32 32 Maleki-EP 150 https://www.malekigmbh.com/en/maleki-ep-150/ Wed, 08 Nov 2023 14:41:00 +0000 https://www.malekigmbh.com/maleki-ep-150/ Maleki-EP 150 Two-component epoxy coating Chemical resistant epoxy coating. Can be used as a primer and as a sealer. Product description two-component solvent-free water vapor permeable water-dilutable abrasion resistant chemical resistant Range of usage for indoor and outdoor use absorbent and non-absorbent substrates in wall and floor areas as protective coating for highly stressed surfaces

Der Beitrag Maleki-EP 150 erschien zuerst auf Maleki GmbH.

]]>

Maleki-EP 150

Two-component epoxy coating

Chemical resistant epoxy coating. Can be used as a primer and as a sealer.

  • two-component
  • solvent-free
  • water vapor permeable
  • water-dilutable
  • abrasion resistant
  • chemical resistant

  • for indoor and outdoor use

  • absorbent and non-absorbent substrates in wall and floor areas
  • as protective coating for highly stressed surfaces such as workshops, warehouses and production areas
  • as primer for critical substrates

Consumption calculator

Ready-to-use: approx. 300 g/m² per coating (2 coatings necessary)

Delivery form:

6 kg combination container with 5 kg component A and 1 kg component B

24 kg container (single) with 20 kg component A and 4 kg component B each

Technical documents:

Der Beitrag Maleki-EP 150 erschien zuerst auf Maleki GmbH.

]]> Maleki-TG 110 https://www.malekigmbh.com/en/maleki-tg-110/ Fri, 27 Oct 2023 09:59:59 +0000 https://www.malekigmbh.com/maleki-tg-110/ Maleki-TG 110 Primer Solvent-free primer to reduce the absorbency of mineral substrates. Product description environmentally friendly very low emission EMICODE EC 1PLUS water vapor permeable increases the strength of porous substrates improves the adhesion on the substrate dust-binding prevents bubble formation in subsequent coatings Range of usage for indoor and outdoor use for preparation of

Der Beitrag Maleki-TG 110 erschien zuerst auf Maleki GmbH.

]]>

Maleki-TG 110

Primer

Solvent-free primer to reduce the absorbency of mineral substrates.

  • environmentally friendly
  • very low emission EMICODE EC 1PLUS
  • water vapor permeable
  • increases the strength of porous substrates
  • improves the adhesion on the substrate
  • dust-binding
  • prevents bubble formation in subsequent coatings

  • for indoor and outdoor use

  • for preparation of mineral substrates like concrete, screed, plaster, sand-lime bricks, gypsum fiberboards, etc.

  • for the subsequent processing of floor coatings (Maleki-DFS/IFS product line), self-leveling compounds (Maleki-BV 310), mineral ashesives and fillers

  • suitable for use in food processing companies
  • as an impervious layer for subsequent thin film covering on absorbent and mineral substrates

  • temporary drying brake on fresh concrete

  • temporary impregnation

  • as a wallpaper underground

GEV - Association of Emission Controlled Installation Materials, Adhesives and Building Products e. V.

EMICODE EC 1PLUS

 

ISEGA Cert GmbH Aschaffenburg

Certificate of compliance - Suitability for coating of floors in food processing plants in accordance with EN 1186, EN 13130 and CEN/TS 14234.

Consumption calculator

 

Concrete and screed: approx. 150 – 200 g/m²

Masonry and walls: approx. 100 – 200 g/m²

Self-leveling compounds: approx. 100 – 150 g/m²

 

Delivery form:

5 kg canister

30 kg canister

1000 kg container

 

Packed on pallet:

60x5 kg canister, 300 kg net / pallet

18x30 kg canister, 540 kg net / pallet

1x IBC-Container, 1000 kg net / pallet

Technical documents:

Brochure:

Der Beitrag Maleki-TG 110 erschien zuerst auf Maleki GmbH.

]]> Maleki-RM 500 https://www.malekigmbh.com/en/maleki-rm-500/ Fri, 27 Oct 2023 09:53:12 +0000 https://www.malekigmbh.com/maleki-rm-500/ Maleki-RM 500 Patching mortar Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work. Product description Eco-Binder technology environmentally friendly mineral VOC- and APEO-free low in chromate according to DIN EN 196-10 fast-curing and low tension high compressive strength high abrasion resistance easy application good chemical resistance Range of usage for

Der Beitrag Maleki-RM 500 erschien zuerst auf Maleki GmbH.

]]>

Maleki-RM 500

Patching mortar

Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work.

  • Eco-Binder technology

  • environmentally friendly

  • mineral

  • VOC- and APEO-free

  • low in chromate according to DIN EN 196-10

  • fast-curing and low tension

  • high compressive strength

  • high abrasion resistance

  • easy application

  • good chemical resistance

  • for repair work on concrete and facades

  • for the formation of fillets at wall / floor and wall / wall connections

  • for smoothing work

  • suitable for concrete, cement screed, brick and limestone masonry

  • for surface preparation in combination with subsequent coating or waterproofing i.e. with Maleki-DS 250 Flex

  • applicable in layer thicknesses of 3 – 50 mm

Consumption calculator

Approx. 1.8 kg/m² and mm layer thickness

 

Delivery form:

25 kg paper bag

 

Packed on pallet:

1050 kg net/pallet

42x25 kg bag

Technical documents:

Der Beitrag Maleki-RM 500 erschien zuerst auf Maleki GmbH.

]]> Maleki-FS 440 https://www.malekigmbh.com/en/maleki-fs-440/ Fri, 27 Oct 2023 09:25:39 +0000 https://www.malekigmbh.com/maleki-fs-440/ Maleki-FS 440 Flexible floor mortar Self-leveling, flexible floor mortar for critical substrates. Can be used as an intermediate layer on cracked surfaces. Product description Eco-Binder technology environmentally friendly very low emission EMICODE EC 1PLUS fast-curing and low tension high flowability polymer-modified flexible easy application also processible by machine Range of usage for indoor and outdoor

Der Beitrag Maleki-FS 440 erschien zuerst auf Maleki GmbH.

]]>

Maleki-FS 440

Flexible floor mortar

Self-leveling, flexible floor mortar for critical substrates. Can be used as an intermediate layer on cracked surfaces.

  • Eco-Binder technology

  • environmentally friendly

  • very low emission EMICODE EC 1PLUS

  • fast-curing and low tension

  • high flowability

  • polymer-modified

  • flexible

  • easy application

  • also processible by machine

  • for indoor and outdoor use

  • for revision concrete and screed

  • for coating of cracked surfaces, as an intermediate layer for further processing with Maleki IFS-products

  • walkable after 4 hours

  • applicable in a wide area in layer thicknesses of 1 mm

  • cracks can be filled up to a depth and width of 5 mm

GEV - Association of Emission Controlled Installation Materials, Adhesives and Building Products e. V.

EMICODE EC 1PLUS

Consumption calculator

Approx. 1.7 kg/m² and mm layer thickness

 

Delivery form:

25 kg paper bag

 

Packed on pallet:

1050 kg net/pallet

42x25 kg bag

Technical documents:

Brochure:

Der Beitrag Maleki-FS 440 erschien zuerst auf Maleki GmbH.

]]> Maleki-VM 530 https://www.malekigmbh.com/en/maleki-vm-530/ Fri, 27 Oct 2023 08:57:29 +0000 https://www.malekigmbh.com/maleki-vm-530/ Maleki-VM 530 All-round pouring mortar Shrinkage-free fast-setting mortar for construction. Hardens fast and with low tension. Can be mixed with quartz sand for higher layer thickness. Product description Eco-Binder technology environmentally friendly mineral very low emission EMICODE EC 1PLUS low in chromate according to DIN EN 196-10 fast-curing and low tension highly resistant to mechanical

Der Beitrag Maleki-VM 530 erschien zuerst auf Maleki GmbH.

]]>

Maleki-VM 530

All-round pouring mortar

Shrinkage-free fast-setting mortar for construction. Hardens fast and with low tension. Can be mixed with quartz sand for higher layer thickness.

  • Eco-Binder technology
  • environmentally friendly
  • mineral
  • very low emission EMICODE EC 1PLUS
  • low in chromate according to DIN EN 196-10
  • fast-curing and low tension
  • highly resistant to mechanical stress
  • waterproof up to 1.5 bar
  • early loadable, high final strength
  • good flowability
  • easy application
  • also processible by machine

  • for indoor and outdoor use

  • repairs on mineral surfaces in dry, damp and permanently wet conditions

  • for under filling and encapsulation of bolts, foundation for machinery, crane rails, pillars and other steel constructions

  • filling of construction joints between precast or precast slabs, basements ceiling tiles and soles

  • force-locked crack repair

  • repairs on defects in concrete, screed, masonry, natural and artificial stones

  • quick creation of small point foundations

  • suitable for work under time constraint

GEV - Association of Emission Controlled Installation Materials, Adhesives and Building Products e. V.

EMICODE EC 1PLUS

Consumption calculator

Aproxx. 2.0 kg/m² per liter cavity

 

Delivery form:

25 kg paper bag

 

Packed on pallet:

1050 kg net/pallet

42x25 kg bag

Technical documents:

Brochure:

Der Beitrag Maleki-VM 530 erschien zuerst auf Maleki GmbH.

]]> Maleki-FEC 370 https://www.malekigmbh.com/en/maleki-fec-370/ Fri, 27 Oct 2023 08:35:35 +0000 https://www.malekigmbh.com/maleki-fec-370/ Maleki-FEC 370 Fine flowing screed Self-leveling flowing screed of strength class C40-F7 in accordance with DIN EN 13813. Hardens with low tension with a layer thickness of 5 – 70 mm. Product description Eco-Binder technology environmentally friendly mineral very low emission EMICODE EC 1PLUS fast-curing and low tension high flowability easy application also processible by

Der Beitrag Maleki-FEC 370 erschien zuerst auf Maleki GmbH.

]]>

Maleki-FEC 370

Fine flowing screed

Self-leveling flowing screed of strength class C40-F7 in accordance with DIN EN 13813. Hardens with low tension with a layer thickness of 5 – 70 mm.

  • Eco-Binder technology
  • environmentally friendly
  • mineral
  • very low emission EMICODE EC 1PLUS
  • fast-curing and low tension
  • high flowability
  • easy application
  • also processible by machine

  • for indoor and outdoor use

  • used to smoothen rough and uneven concrete and screed surfaces

  • installation of heated and unheated screed constructions

  • installation of floating screeds, screeds on separating layers and bonded screeds

  • walkable and ready for covering at an early stage

  • applicable in layer thicknesses of 5 - 70 mm

GEV - Association of Emission Controlled Installation Materials, Adhesives and Building Products e. V.

EMICODE EC 1PLUS

Consumption calculator

Approx. 1.7 kg/m² and mm layer thickness

 

Delivery form:

25 kg paper bag

 

Packed on pallet:

1050 kg net/pallet

42x25 kg bag

Technical documents:

Brochure:

Der Beitrag Maleki-FEC 370 erschien zuerst auf Maleki GmbH.

]]> Maleki-BV 310 https://www.malekigmbh.com/en/maleki-bv-310-2/ Thu, 26 Oct 2023 17:52:48 +0000 https://www.malekigmbh.com/maleki-bv-310/ Maleki-BV 310 Standard leveling mortar Easy-to-use, self-leveling floor coating of strength class C35-F7-A22 in accordance with DIN EN 13813. Hardens with low tension in a layer thickness of 2 – 50 mm. Product description Eco-Binder technology environmentally friendly mineral very low emission EMICODE EC 1PLUS fast-curing and low tension high flowability easy application also processible

Der Beitrag Maleki-BV 310 erschien zuerst auf Maleki GmbH.

]]>

Maleki-BV 310

Standard leveling mortar

Easy-to-use, self-leveling floor coating of strength class C35-F7-A22 in accordance with DIN EN 13813. Hardens with low tension in a layer thickness of 2 – 50 mm.

  • Eco-Binder technology
  • environmentally friendly
  • mineral
  • very low emission EMICODE EC 1PLUS
  • fast-curing and low tension
  • high flowability
  • easy application
  • also processible by machine

  • for indoor and outdoor use

  • for smoothing rough, uneven concrete and screed surfaces

  • for installation of basic wear layers

  • walkable and ready for covering at an early stage

  • applicable in layer thicknesses from 2 - 50 mm

GEV - Association of Emission Controlled Installation Materials, Adhesives and Building Products e. V.

EMICODE EC 1PLUS

Consumption calculator

Approx. 1.7 kg/m² and mm layer thickness

 

Delivery form:

25 kg paper bag

 

Packed on pallet:

1050 kg net/pallet

42x25 kg bag

Technical documents:

Brochure:

Der Beitrag Maleki-BV 310 erschien zuerst auf Maleki GmbH.

]]>