Maleki-RM 500

Allround and environmentally friendly repair mortar

Product overview:

Maleki All in One Patching Mortar is an innovative and universal mortar on a new cement-reduced composite binder material. It is very easy to smoothen and is simple to get into shape. Its an inorganic and fast curing binding system that achieves complete water retention within 6h*.

Suitable for following applications:

Maleki All In One Patching Mortar is used for the repair of defects in concrete surfaces and facades, for the formation of fillets at wall / floor and wall / wall connections, and for finishing. Suitable substrates are concrete, cement screed, brick and limestone masonry. The layers should be 3 to 50mm thick.

Properties and benefits:

• Graining up to 2mm
• Fast hydraulic curing
• Low swelling and low shrinkage
• Fully loadable after 2 days
• Mechanically high resistant – abrasion resistant
• Applicable from 3°C to 45°C
• Waterproof and water vapor permeable
• Salt water resistant
• Good chemical resistance
• Suitable for wet areas
• Inorganic material and no allergy potential
• Solvent free, VOC-free and odorless
• Fire resistant and non flammable
• Very high adhesion, compressive and tensile strength even on wet substrates
• No labeling required / no risk classification
• Environmentally friendly raw materials with low CO₂ emission
• Not just recycling but up cycling of waste material
• Large areas are manageable in one operation
• Economic due to simple processing